
Technical Specification -Ingredients
INGREDIENT | % | CAS | EINECS |
Glycerine | 25 – 50 | 56-81-5 | 200-289-5 |
Aqua | 10 – 25 | 7732-18-5 | 231-791-2 |
Sorbitol | 10 – 25 | 50-70-4 | 200-061-5 |
Sodium Laurate | 10 – 25 | 629-25-4 | 211-082-4 |
Sodium Stearate | 10 – 25 | 822-16-2 | 212-490-5 |
Aloe Barbadensis Leaf Juice | 0.5 – 1.0 | 85507-69-3 | 287-390-8 |
Sodium Oleate | 5 – 10 | 143-19-1 | 205-591-0 |
Sodium Chloride | 0.1 – 0.5 | 7647-14-5 | 231-598-3 |
Azadirachta Indica Extract | 0.5 – 1.0 | 84696-25-3 | 283-644-7 |
Sodium Citrate | 0.1 – 0.5 | 68-04-2 | 200-675-3 |
Pentasodium Pentetate | < 0.1 | 140-01-2 | 205-391-3 |
Tetrasodium Etidronate | < 0.1 | 3794-83-0 | 223-267-7 |
Technical Specification- Product
Appearance | Translucent solid at 25°C Free from contamination and air entrainment. |
Water Content (Dean & Stark) | 22.5% - 27.5% |
Free Fatty Acid | 0.7% - 1.1% |
Colour | 1.0 Yellow / 10.0 Green max. |
DIRECTIONS TO USE
It’s so easy to make a simple Herbal Neem & Aloevera Soap Bar. Natural Neem & Aloevera Base - slice into meltable pieces Add Fragrance as your wish Add dried botanicals as your wish A soap mould and slicer Microwave / double boiler
STEP 1.Open / cut - simply open the packaging, safely cut the Herbal soap base into smaller cubes, doing this will make the soap easier to handle and melt.
STEP 2.Melt - gradually heat the soap base ensuring that the soap melts evenly and does not boil and burn. If you are melting in a microwave please be careful and keep an eye on the soap as it can bubble over the container.
STEP 3.Mix - you can use Essential Oils, Fragrances, Colours, Botanicals and Additives. Simply add to the melted soap base, mix gently ensuring that any fragrance you have added is evenly distributed throughout the soap base.
STEP 4.Pour - working quickly, simply pour your soap base into your soap mould. At this point you can add dried botanicals to the surface of the soap, by gently pressing them into the top of the soap if you wish.
STEP 5.Make - once your soaps have set and fully hardened simply remove from the moulds. We recommend always wrapping your soap bars immediately after releasing from the moulds to protect and preserve the soap.
PACKAGING
Herbal Melt & Pour soap bases are available in a range of packaging; just pick a size that suits your needs: