Product Description

• COLOUR: Natural Activated Charcoal
• BRAND: Ojass 
• PRODUCT::HERBAL SOAP BASE-NEEM & ALOEVERA 
• SHAPE: Small Cubes 
• MAIN INGREDENTS: Coconut Oil,Glycerine,Tea Tree Oil, Neem & Aloevera Extracts 
• SPECIFIC: Its easy to make a simple Crystal  Activated Charcoal Soap Bar. 

Technical Specification -Ingredients

INGREDIENT	%	CAS	EINECS
Glycerine	25 50	56-81-5	200-289-5
Aqua	10 25	7732-18-5	231-791-2
Sorbitol	10 25	50-70-4	200-061-5
Sodium Laurate	10 25	629-25-4	211-082-4
Sodium Stearate	10 25	822-16-2	212-490-5
Citrus Extract	0.5 - 1.0	84929-31-7	284-515-8
Sodium Oleate	5 10	143-19-1	205-591-0
Sodium Chloride	0.1 0.5	7647-14-5	231-598-3
Citric Acid	0.1 0.5	77-92-9	201-069-1
Sodium Citrate	0.1 0.5	68-04-2	200-675-3
Pentasodium Pentetate	< 0.1	140-01-2	205-391-3
Tetrasodium Etidronate	< 0.1	3794-83-0	223-267-7

Technical Specification- Product

Appearance	Translucent solid at 25C Free from contamination and air entrainment.
Water Content (Dean  & Stark)	22.5% - 27.5%
Free Fatty Acid	0.7% - 1.1%
Colour	Natural Charcoal

DIRECTIONS TO USE

Its so easy to make a simple Herbal Activated Charcoal Soap Bar.  Natural Activated Charcoal Base - slice into meltable pieces Add Fragrance as your wish Add dried botanicals as your wish A soap mould and slicer Microwave / double boiler

STEP 1.Open / cut - simply open the packaging, safely cut the Herbal soap base into smaller cubes, doing this will make the soap easier to handle and melt.

STEP 2.Melt - gradually heat the soap base ensuring that the soap melts evenly and does not boil and burn. If you are melting in a microwave please be careful and keep an eye on the soap as it can bubble over the container.

STEP 3.Mix - you can use Essential Oils, Fragrances, Colours, Botanicals and Additives. Simply add to the melted soap base, mix gently ensuring that any fragrance you have added is evenly distributed throughout the soap base.

STEP 4.Pour - working quickly, simply pour your soap base into your soap mould. At this point you can add dried botanicals to the surface of the soap, by gently pressing them into the top of the soap if you wish.

STEP 5.Make - once your soaps have set and fully hardened simply remove from the moulds. We recommend always wrapping your soap bars immediately after releasing from the moulds to protect and preserve the soap.

PACKAGING

Herbal Melt & Pour soap bases are available in a range of packaging; just pick a size that suits your needs: